kz1300 banner

Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC:

Mixture screws 3 weeks 2 days ago #28978

  • paulb
  • paulb's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 177
  • Thank you received: 16
Hi Gents
after some advice about carb mixture screws, i have set mine with a gunsens colour tune and all seemed well however after riding the bike for a while the bike is popping from the exhaust so i am back at the carbs and they seem to have gone out of adjustment again could the screws be vibrating out of the position i have set them in, also any advice on where to get new mixture screws from i have damaged the head on number 3 which appears to be a right bastard to get to while on the bike, the uk shop i normally use want £20 for one which is a bit much.
many thanks

Please Log in or Create an account to join the conversation.

Mixture screws 3 weeks 1 day ago #28979

  • englishcw
  • englishcw's Avatar
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 32
  • Thank you received: 15
Hi Paul . No Expert , If the Mixture Screws are vibrating loose , perhaps the tiny '' O '' rings have gone hard , and not holding them in position .  There is the information , somewhere on the site , with the sizes required in the material Viton . I re-built my Carbs , so I have some spare Mixture Scews , I am in the UK . PM me your addy , I will put one in the Post . clive .

Please Log in or Create an account to join the conversation.

Last edit: by englishcw.

Mixture screws 3 weeks 1 day ago #28980

  • paulb
  • paulb's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 177
  • Thank you received: 16
Thanks Clive
much appreciated hopefully i have sent you a PM

Please Log in or Create an account to join the conversation.

Mixture screws 3 weeks 1 day ago #28981

  • englishcw
  • englishcw's Avatar
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 32
  • Thank you received: 15
O.K. If I can get my sorry ass into Gear , will post tomorrow .
The following user(s) said Thank You: paulb

Please Log in or Create an account to join the conversation.

Mixture screws 3 weeks 1 day ago #28983

  • scotch
  • scotch's Avatar
  • Offline
  • Sustaining Member
  • Sustaining Member
  • Posts: 1589
  • Thank you received: 662
1980 KZ 1300 sr# KZT30A-009997
Always High - Know Fear !
The following user(s) said Thank You: paulb, englishcw

Please Log in or Create an account to join the conversation.

Last edit: by scotch.

Mixture screws 2 weeks 6 days ago #28989

  • paulb
  • paulb's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 177
  • Thank you received: 16
Hi Clive
got the screws today many thanks for putting yourself out
Paul

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
  • 2
Time to create page: 0.060 seconds
Powered by Kunena Forum