Welcome, Guest
Username: Password: Remember me
Electrical
  • Page:
  • 1

TOPIC:

How to Repair Instrument Cluster "Glass" 3 years 9 months ago #27760

  • rdurost
  • rdurost's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 177
  • Thank you received: 27
My 85-MPH speedo has a cracked face. I can make it functional and waterproof easily, but I'd rather replace the glass. What is the least elaborate and expensive way to accomplish this?

Thanks in advance.

Richard

Please Log in or Create an account to join the conversation.

How to Repair Instrument Cluster "Glass" 3 years 9 months ago #27764

  • englishcw
  • englishcw's Avatar
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 49
  • Thank you received: 25
I replaced my broken glass with scratch resistant Polycarbonate . If you make a pattern , about 1/4 inch undersize , a Glazier might be able to cut one out of glass .

Please Log in or Create an account to join the conversation.

How to Repair Instrument Cluster "Glass" 3 years 9 months ago #27770

  • rdurost
  • rdurost's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 177
  • Thank you received: 27
So if I take apart the housing, I can remove the glass from the inside, I assume. It it glued in or clipped in somehow?

Please Log in or Create an account to join the conversation.

How to Repair Instrument Cluster "Glass" 3 years 9 months ago #27771

  • englishcw
  • englishcw's Avatar
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 49
  • Thank you received: 25
It has been many many Years since I did it , If I remember there is a rubber Gasket . If it had been difficult , or problematic , I would have remembered .
The following user(s) said Thank You: rdurost

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.053 seconds
Powered by Kunena Forum