Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC:

cam chain replacement 6 years 8 months ago #16959

  • z13phil
  • z13phil's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 69
  • Thank you received: 8
Hi Guy's, I need to change my cam chain. Any instructions or photos would be very helpful. I also need to know if this can be done from the top engine cover.

Please Log in or Create an account to join the conversation.

cam chain replacement 6 years 8 months ago #16960

  • Kawboy
  • Kawboy's Avatar
  • Offline
  • Sustaining Member
  • Sustaining Member
  • Posts: 2995
  • Thank you received: 1027

z13phil wrote: Hi Guy's, I need to change my cam chain. Any instructions or photos would be very helpful. I also need to know if this can be done from the top engine cover.

I did it . You have to buy a new chain AND a master link AND a chain peening tool. You split the chain, feed it in and around the secondary shaft in the bottom of the engine, assemble the master link and using the tool, deform the end of the masterlink pins.
Have a look at my thread on this.
kz1300.com/index.php/forum/bike-projects...a-1980-kz13?start=24

Please Log in or Create an account to join the conversation.

cam chain replacement 6 years 8 months ago #16961

  • Bucko
  • Bucko's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 667
  • Thank you received: 164
I've done it on a Honda engine. Didn't use a master link, just pressed a pin out, connected it to the old chain, dragged the new chain in while pulling the old one out, then connected the links and pushed the pin back in. You need to pull your cams before doing this the carefully re-time everything.

Got to say: I've never felt 100% comfortable with doing this but so far, no problems (touch wood).
Hello from Canada's We(s)t coast.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.058 seconds
Powered by Kunena Forum