kz1300 banner

Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC:

Alternative parts list 3 weeks 5 days ago #29098

  • LareNurminen
  • LareNurminen's Avatar
  • Offline
  • Sustaining Member
  • Sustaining Member
  • Posts: 289
  • Thank you received: 142
Ignitech.cz is a site where they sell pulse coils. I recall thet they have one that fits A1, A2 and A4

Please Log in or Create an account to join the conversation.

Alternative parts list 3 weeks 5 days ago #29099

  • zed_thirteen
  • zed_thirteen's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 461
  • Thank you received: 116

Ignitech.cz is a site where they sell pulse coils. I recall thet they have one that fits A1, A2 and A4


 

Thanks, looks like a useful site. However, I can't see a direct replacement on their pick-ups page:  Pick-ups - IgniTech Přelouč
1980 KZ1300 B2 Touring/A2
1990 ZZ-R1100 C1

Please Log in or Create an account to join the conversation.

Alternative parts list 3 weeks 1 day ago #29116

  • Phil
  • Phil's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • 1984 ZG1300-A1 DFI
  • Posts: 448
  • Thank you received: 139
This is a replacement for the main relay on the DFI models apparently www.autodeler.co.no/bosch/1154868
Only dead fish go with the flow

Please Log in or Create an account to join the conversation.

Last edit: by Phil.

Alternative parts list 3 weeks 1 day ago #29117

  • LareNurminen
  • LareNurminen's Avatar
  • Offline
  • Sustaining Member
  • Sustaining Member
  • Posts: 289
  • Thank you received: 142
On the dimensions page you have the specs, just check there against your current one
 

Please Log in or Create an account to join the conversation.

Alternative parts list 3 weeks 1 day ago #29118

  • zed_thirteen
  • zed_thirteen's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 461
  • Thank you received: 116

On the dimensions page you have the specs, just check there against your current one




 

Hi Lare,  I had a look at those dimensions but the A1 and A2 pickups all mount to the rear of the sensor. All the ones on ignitech.cz pickups mount below the sensor.  If they are compatible it might be possible to fabricate a new carrier plate?
 
Also - a little worrying when the dimensions list their properties as resistance/ohms when a coils properties should be inductance/mH
1980 KZ1300 B2 Touring/A2
1990 ZZ-R1100 C1
Attachments:

Please Log in or Create an account to join the conversation.

Last edit: by zed_thirteen.

Alternative parts list 3 weeks 20 hours ago #29119

  • LareNurminen
  • LareNurminen's Avatar
  • Offline
  • Sustaining Member
  • Sustaining Member
  • Posts: 289
  • Thank you received: 142
Hi, I looked at the products of Ignitech years ago when we worked on the replica igniter for A3. I noticed then that they have pulse coils, they might be willing to make a small series for A1-A2.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
  • 2
Time to create page: 0.082 seconds
Powered by Kunena Forum