kz1300 banner

Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC:

Using Pilot adjustment to <slightly> improve carb sync - plug check - sync check 2 weeks 3 days ago #30407

  • dcarver220b
  • dcarver220b's Avatar Topic Author
  • Offline
  • Sustaining Member
  • Sustaining Member
  • Posts: 374
  • Thank you received: 90
2022-06-16 Spark Plug Readings using BP8ES not BP6ES plugs (colder) Plugs came back looking lea nSo installed colder plugs, rode 100+ miles.Here's the results.The numbering is wrong. Really 4, 5, 6. These look much much better than before...
The entire set, electrodes left. 1,2,3,5 look a tad to black.
Electrodes right.
 

Please Log in or Create an account to join the conversation.

Last edit: by dcarver220b.

Using Pilot adjustment to <slightly> improve carb sync - plug check - sync check 2 weeks 3 days ago #30408

  • dcarver220b
  • dcarver220b's Avatar Topic Author
  • Offline
  • Sustaining Member
  • Sustaining Member
  • Posts: 374
  • Thank you received: 90
1, 2, 3 inlet ports. Pretty good.
4,5,6 not as good but didn't want to mess with sync... running out of time.
Need to get the spec's from FSM...I discovered one can adjust the pilot jets and slightly change the 'balance'. I tuned by ear and for max vacuum on the stix. These are the results.Video to follow. 

 

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.054 seconds
Powered by Kunena Forum