Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC:

GAS CAP 3 years 8 months ago #27560

  • paulb
  • paulb's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 197
  • Thank you received: 19
Hi, i have an issue with a gas cap on a new bike i have just brought, i seem to be getting a very small fuel leak which appears to be coming from the key slot in the petrol cap, i have never encountered this before on a z1300, it looks like a standard cap any ideas i am guessing i am looking at an O ring failure or similar
thanks for any help

Please Log in or Create an account to join the conversation.

GAS CAP 3 years 8 months ago #27561

  • scotch
  • scotch's Avatar
  • Offline
  • Sustaining Member
  • Sustaining Member
  • Posts: 1890
  • Thank you received: 831
Open the cap and take a picture or two, please
1980 KZ 1300 sr# KZT30A-009997
Always High - Know Fear !

Please Log in or Create an account to join the conversation.

GAS CAP 3 years 8 months ago #27562

  • BigSix
  • BigSix's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 766
  • Thank you received: 224
Hi Paul

Do you encounter a residue that is located around the key-slot, yellowish to brown that can be removed easily with oil or gasoline ?

Holger
Z1300 A1/ KZT30AG built 1979
frame KZT30A 004285
engine KZT30A 000288
location: borderland-triangle France/ Germany/ Switzerland, Europe

Please Log in or Create an account to join the conversation.

GAS CAP 3 years 8 months ago #27568

  • paulb
  • paulb's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 197
  • Thank you received: 19
Hi Holger
i only got the bike yesterday and it was very low on fuel so put a few gallons of super unleaded in it and took it for a run, initially it was popping a bit but that cleared but i noticed a small amount of fuel coming out of the key slot, i will try and take a photo of the internals of the cap later

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.050 seconds
Powered by Kunena Forum